N900
series install
Installation Instructions
3. Assemble the weighing platform
Place the cover on the weighing platform. Press down on each corner to be sure it is completely seated.
5. Install the Rate PROM
Slide the Rate PROM into the slot with the unlabelled side facing you. Press it firmly until it snaps into place. Refit cover.
4. Remove the control module cover
Remove the cover from the top rear of the control module and set aside.
6.Connect weighing platform to control
module
Turn the control module over and plug the small end of the weighing platform cable into the back of the module.
Underside of
Control Module
Page 12