12 | Dome E2c Display
Specification

In locations where 240V outlets are used, connect the Dome E2c display only to a center-

tapped, 240V, single-phase supply (only for Canada and the United States).

Category Characteristic Item Specification

Screen Screen size diagonal 541 mm (21.3 in.)
Native resolution 1200 x 1600 pixels (portrait & landscape)
Colors supported 16M colors, 24 bit
Refresh rate 60 Hz
Contrast ratio 900:1 (typical)
Brightness 500 cd/m2 minimum
Viewing angle 178° (± 89°) horizontal/vertical
Interface Digital Video In DVI-D Rev. 1.0 single-channel connector
Analog Video In DVI-A or VGA; S-Video, Composite Video
Display control, brightness/contrast DDC2B+
Display identification EDID 1.3 read using DDC2B+
USB hub Universal Serial Bus (USB) Rev. 1.1:
1 uplink B port; 2 downlink A ports
Display status Bicolor LED on connector plate
Input Formats Landscape orientation 1600 x 1200
Portrait orientation 1200 x 1600
VGA/SVGA/XGA/SXGA 640 x 480 to 1280 x 1024 displayed in both
landscape and portrait rotations
S-Video & Composite modes NTSC, PAL, SOG
Screen type AMLCD (active matrix liquid crystal display)
Physical Display size (without stand) 483 mm x 375 mm x 112 mm
(19.0 in. x 14.8 in. x 4.4 in.)
Display weight (without stand) 5.44 kg (12 lb)
Mounting options Desktop stand with integrated USB hub (standard);
100-mm VESA mounting (optional)
Power
Requirements
Input voltage +12 V ±5%
Power consumption 120 Watts maximum