
Connectors
•J1: Video input
15 pin
•J2: Power interrupt
CviLux CP35 2P*H00 (black); terminal part number
Mating connector is Molex Micro Fit Jr., Molex part number
The power interrupt switch is connected to a single pole single throw normally open push button (SPST N.O) switch. This can be connected to your docking station or computer’s power button.
•J3: Audio input 3mm jack
• J4: USB upstream Type B
Type B for connecting to the computer
•J5: DC power input
The table below lists the connector’s pin assignments, and the figure at right shows the physical layout as seen by the interface cable from the DC power source.
| Pin number | Signal |
|
|
|
1 | (Square) | Positive input voltage (12V) |
|
|
|
2 | Return (GND) | |
|
|
|
•J7, J8: USB downstream Type A
LX1200TR User’s Manual | Page 19 of 20 |