Planar PL170M manual MISC Sub-Menu

E

move the screen to the right, [−] button to move to the left. Press [Menu] to return to LCD ADJUST Sub-Menu.

V–POSITION Moves the screen image up or down. Select V-POSITION using the [+]

Nor [−] button, then press [Menu] to activate the function. Press [+] button to move the screen

G

L image up, [−] button to move down. Press [Menu] to return to LCD ADJUST Sub-Menu.

I

S

H FINE TUNE Aligns the performance slightly. Select FINE TUNE using the [+] or [−] button, then press [Menu] button to activate the function. Press [+] or [−] button until the screen image looks crisp, sharp and focused. Press [Menu] to return to LCD ADJUST Sub- Menu after alignment.

AUTO–SYNC Automatically adjusts the image to the best performance. Press [+] or [−] button to select AUTO SYNC, then press [Menu] button to activate AUTO SYNC.

NOTE:

When setting up this monitor for the first time, perform AUTO-SYNC before use. To perform AUTO-SYNC, first display an image that makes the entire screen very bright. It is better to perform AUTO-SYNC under WINDOWS.

LANGUAGE Selects preferred language used in the OSD menus. Under Main Menu, scroll to Language using [+] or [−] button, then press [Menu] button to activate the function. Press [+] or [−] button to choose preferred Language, then press [Menu] button to save selection and exit OSD or go to MAIN MENU to return to OSD Main Menu.

MISC Sub-Menu

Under the Main Menu, select MISC using the [+] or [−] button, then press [Menu] button to enter MISC Sub-Menu.

H-OSD POSITION Moves the OSD position on the screen to the right or left. Select H- OSD POSITION using [+] or [−] button, then press [Menu] button to activate the function. Press the [+] button to move the OSD position to the right, [−] button to move left. Then Press [Menu] to return to MISC Sub-Menu after adjustment.

10