Planar PL1910W manual Troubleshooting, VGA Mode

Troubleshooting

Before sending your LCD monitor for servicing, please check the troubleshooting list below to

see if you can self-diagnose the problem.

(VGA Mode)

Problems	Current Status	Remedy
No Picture	LED ON	Using OSD, adjust brightness and contrast to
		maximum or reset to their default settings.
	LED OFF	Check the power switch.
		Check if AC power cord is properly connected to the
		monitor.

	LED displays amber color
Abnormal	Unstable Picture

Picture

Display is missing, center shift, or too small or too large in display size

Check if video signal cable is properly connected to the monitor.

Check if the power of computer system is ON.

Check if the specification of graphics adapter and

Using OSD, adjust RESOLUTION, CLOCK, CLOCK- PHASE, H-POSITION and V-POSITION with non- standard signals.

Using OSD, in case of missing full-screen image, please select other resolution or other vertical refresh timing.

Wait for a few seconds after adjusting the size of the image before changing or disconnecting the signal cable or powering OFF the monitor.

(DVI Mode)

Problems	Current Status	Remedy
No Picture	LED ON	Using OSD, adjust brightness and contrast to
		maximum or reset to their default settings.
	LED OFF	Check the power switch.
		Check if AC power cord is properly connected to the
		monitor.
	LED displays amber color	Check if video signal cable is properly connected to
		the monitor.
		Check if the power of computer system is ON.

17