Connecting the LCD Monitor and Base

Connecting the LCD Monitor and Base

When you open the box, place the monitor and put on the desk first. (See fig. 1-1)

Connect the LCD monitor and base.

Using your hand, lock the base and neck by screwing the thread clockwise.

To unlock the height adjustment feature of the stand, locate the pin on the back of the stand column and turn the pin knob counterclockwise.

Mount the cable clip for cable management.

Tilt, Swivel and Pivot Rotation

The LCD Monitor is designed to have a tilt range of -5°to +20°, a swivel range of -35°to +35°, and a 90° pivot rotation. (See fig. 1-2)

2

Tilt, Swivel and Pivot RotationManual backgroundManual backgroundManual backgroundManual background°

4

hook up the cable clip

3

Remove PIN by turning counterclockwise

Figure 1-1

Figure 1-2

Warning

Do not force the LCD Monitor over its maximum viewing angle settings as stated above. Attempting this will result in damaging the Monitor and Monitor stand. The monitor stand base may forcefully extend and cause injury. Raise the monitor to its "Full Up" position before removing the monitor stand.

5

Page 6
Image 6
Planar PL1911M manual Connecting the LCD Monitor and Base, Tilt, Swivel and Pivot Rotation