Optional Mounting Alternatives

Optional Mounting Alternatives

Warning: The monitor stand base may forcefully extend and cause injury. Raise the monitor to its "Full Up" position before removing the monitor stand.

Detaching LCD Monitor from Its Stand

Unscrew screws the swivel base support column and pull downthe hinge to release.

Cable management ring.

Figure 1-6

Interface for Arm Applications

Before installing to mounting device, please refer to Fig.1-3.

The rear of this LCD display has four integrated 4 mm, 0.7 pitches threaded nuts, as well as four 5 mm access holes in the plastic covering as illustrated in Figure 1-7. These specifications meet the VESA Flat Panel Monitor Physical Mounting Interface Standard (paragraphs 2.1 and 2.1.3, version 1, dated 13 November 1997).

Note :Please use M 4mm x 100m (L) screws for this

 

application.

Figure 1-7

 

7

Page 8
Image 8
Planar PL1911M manual Optional Mounting Alternatives, Detaching LCD Monitor from Its Stand, Interface for Arm Applications