Planar PQ191M manual Specifications

Specifications

Display	Flat Panel Active matrix-TFT LCD
	19 inch diag viewable, Anti-Glare coating, 0.29 mm pixel pitch
	Horizontal Viewing Angle: -85 to +85 deg typical
	Vertical Viewing Angle: -85 to 85 deg typical
Sync Input	Horizontal Freq.	Analog:30 - 83kHz (Automatic)
		Digital:30 - 71kHz (Automatic)
	Vertical Freq.	56 - 75Hz (Automatic)
	Input Form	Separate TTL, Positive/Negative
		Composite TTL Positive/Negative
		SOG (Sync On Green)
		Digital
	Signal Input	15 pin D-Sub Connector
Video Input
		DVI - I connector (Digital/Analog)
	Input Form	RGB Analog (0.7Vp-p/75ohm), Digital
	Max	DVI Digital/Analog:VESA 1280 x 1024@60Hz
Resolution
		D-sub Analog:VESA 1280 x 1024@75Hz
	Recommend	VESA 1280 x 1024@60Hz
	DDC 2B
Plug&Play
Power	Normal	:	43W
Consumption	Stand-by/Suspend ≤		3W
	DPMS Off	≤	3W
Dimensions	Width	41.28 cm / 16.25 inches
&Weight	Height	43.50 cm / 17.13 inches
(with tilt/ swivel	Depth	22.30 cm / 8.78 inches
stand)	Net	7.20 kg (15.87lbs)
Tilt/Swivel Range	Tilt	-5˚~30˚
	Swivel	360˚
Power Input	AC 100-240V~ 50/60Hz 1.0A
Environmental	Operating Conditions
	Temperature	10˚C to 35 ˚C
Conditions
	Humidity	10 % to 80 % non-Condensing
	Storage Conditions
	Temperature	-20˚C to 60 ˚C
	Humidity	5 % to 95 % non-Condensing
Brightness	300 cd/m2 typical
	700:1 typical
Contrast
Power cord	Wall-outlet type
Regulations	UL, cUL, FCC

NOTE

Information in this document is subject to change without notice.

A12