Planar PS5660T, PS4660T, RS232 manual Turn 01 monitor power off CMD POW

RS232 Codes

The following are examples of different RS232 commands as shown in the previous table.

Power Control and Input Source

Turn (01) monitor power off [CMD: POW]

[Transmit] : 07 01 02 50 4F 57 00 08

[Return] : 07 01 00 50 4F 57 00 08

Turn (01) monitor power on [CMD: POW]

[Transmit] : 07 01 02 50 4F 57 01 08

[Return] : 07 01 00 50 4F 57 01 08

Read Power Status from (01) monitor [CMD: POW]

[Transmit] : 07 01 01 50 4F 57 08

[Return] : 07 01 00 50 4F 57 XX 08

XX= 0, the set is off. XX = 1, the set is on.

Display Adjustment

Read back light from (15) monitor [CMD: BRI] (If the setting of back light is 80) [Transmit] : 07 0F 01 42 52 49 08

[Return] : 07 0F 00 42 52 49 50 08

Set back light 80 to (15) monitor [CMD: BRI]

[Transmit] : 07 0F 02 42 52 49 50 08

[Return] : 07 0F 00 42 52 49 50 08

Set Contrast 30 to (02) monitor [CMD: CON]

[Transmit] : 07 02 02 43 4F 4E 1E 08

[Return] : 07 02 00 43 4F 4E 1E 08

Read Contrast from (02) monitor [CMD: CON] (If the monitor contrast setting is 50) [Transmit] : 07 02 01 43 4F 4E 08

[Return] : 07 02 00 43 4F 4E 32 08

PIP and Scaling Adjustment

Set (25) monitor PIP to large [CMD: PSC]

[Transmit] : 07 19 02 50 53 43 03 08

[Return] : 07 19 00 50 53 43 03 08

Set (25) monitor to Pillar box [CMD: ASP]

[Transmit] : 07 19 02 41 53 50 02 08

[Return] : 07 19 00 41 53 50 02 08

6 PS4660T and PS5560T RS232 Codes User Manual