Planar PT1910MX Be sure that USB cable is connected to the computer, PT1915MU Driver Install

20

Please note: Do not plug in both RS232 and USB cables. Doing so may cause a driver conflict, making your touch screen idle.

If you are using USB connection on a PC using an operating system other than Windows® Vista, follow the instructions below:

1.Be sure that USB cable is connected to the computer.

2.Power on the computer.

3.Load the touch screen driver CD.

4.Follow the step-by-step instructions as shown on pop-up windows.

PT1915MU Driver Install:

The touch driver is located on the enclosed CD-ROM for these OS: Windows® VISTA, XP, 2000, 98.

1.Be sure that USB cable is connected to the computer.

2.Power on the computer.

3.Load the touch screen driver CD.

4.Follow the step-by-step instructions as shown on pop-up windows.