![](/images/new-backgrounds/1262627/26262723x1.webp)
8
Start Your Installation
uConnecting the Display (Figure 10.1)
To setup this display, please refer to the following figure and procedures.
1.Be sure all equipment is turned off.
2.Connect the DC power cord to the power connector; plug one end of the AC power cord into the power adapter, and the other end into an electrical outlet(Œ).
3.For the PC with Analog output: Connect the VGA signal cable from display VGA input connector to the
4.For the PC with DVI digital output: Connect the DVI signal cable to the connector of the display card in your computer; connect the other side to the
5.If your video source uses a round,
6.If your video source uses a round,
7.If your audio source uses a round,
8.Turn on your computer, display and video source.
Notice:To ensure the LCD Display will work well with your computer,please configure the display mode of your graphics card to make it less than or equal to 1600 x 1200 resolution and make sure the timing of the display mode is compatible with the LCD screen. We have listed the “Compatibility Modes” of this LCD screen in appendices for your reference.