INSTALLATION INSTRUCTIONS
1 Put a piece of soft cloth on the table beforehand to prevent the monitor from being
scratched. Lay the monitor flat on a table with front face down.
2 Install the Stand-Base to the Monitor.
3 Fix the Monitor with the Stand by the screw 2 firmly, and the knob of the scew push
down.
1 Put a piece of soft cloth on the table beforehand to prevent the monitor from being
scratched. Lay the monitor flat on a table with front face down.
2 Pull up the knob of the scews, and remove the screws and the Stand-Base.
POWER CORD
Power Source:
1. Make sure that the power cord is the correct type required in your area.
2. This LCD monitor has an External universal power supply that allows operation
in either 100/120V AC or 220/240V AC voltage area (No user adjustment is
required.)
3. Connect the AC-power cord into your LCD monitor’s power input socket, The
AC-power cord may be connected to either a wall power outlet or the power
outlet socket on your PC, depending on the type of power cord supplied with
your LCD monitor.
is sprung loaded and may expand quickly when
removing it.
Please stand the monitor and then remove the
stopper pin on the back of the stand slowly while
Pushing top face of the stand before you install the
monitor. Careful attention is required as the monitor
<Remove>
<Stopper pin>
STAND
4