Bluetooth USB Adapter User Guide

Open a connection to the Dial-up Networking service that is provided by another Bluetooth device using one of these techniques:

‧Windows system tray, Bluetooth icon

‧From My Bluetooth Places

‧Using the Bluetooth Setup Wizard

After the Bluetooth dial-up networking connection is established it can be used the same way as any other networking connection. For example, you can open a browser and explore the World Wide Web, if the remote computer has Internet access.

Close a Dial-up Networking connection

‧In My Bluetooth Places, right-click the service name and select Disconnect

or

‧If the connection was established from the Bluetooth icon in the Windows sys-

tem tray; click the Bluetooth icon, select Quick Connect, Dial-up Networking and then select the device that is providing the service (active connections have a checkmark in front of them).

Configure

The Bluetooth Configuration Panel > Client Applications > Dial-up Networking > General tab provides options to configure:

‧The application name—to change it, highlight the existing name and enter the new name.

‧Enable or disable secure connection. To enable secure connection, place a checkmark in the box.

‧The Bluetooth virtual device to be used.

NOTE: Unless you have a specific reason to do so, DO NOT CHANGE the default Bluetooth device or alter the device's configuration.

6.5.7Fax

Overview

The Bluetooth Fax service allows this computer to send a fax using a Fax/Modem that is physically connected to a remote device.

To Send a Fax

1.Open a connection to the Fax service that is provided by another Bluetooth de- vice, using one of these techniques:

Windows system tray, Bluetooth icon From My Bluetooth Places

Using the Bluetooth Setup Wizard

2.Open or create the document to be faxed and select the “Print,” “Send to Fax Recipient” or similar command that is available in most applications.

Close a Fax Connection

Fax connections close automatically when the Fax transmission is complete.

Configure

The Bluetooth Configuration Panel > Client Applications > Fax > General tab provides options to configure:

‧The application name—to change it, highlight the existing name and enter the new name.

‧Enable or disable secure connection. To enable secure connection, place a checkmark in the box.

6.5.8 Headset

26