Step 2：Select the files that you want to backup

In the file list box, use【↑】or【↓】keys to move the scroll bar. When the scroll bar stays at the file you wan to backup, press【EDIT】key to select it. The symbol “9” is the selection tag. You can use the same method to select other files you want to backup. After finish, you can do next step.

Step 3：Select backup device

Please confirm the backup device：USB flash memory, USB HDD, USB CD-R/W or IDE CD-R/W, and select the corresponding backup device.

Step 4：Start and finish backup

Move “Active Frame” to “Save” button and press【ENTER】key to start backup. When backup is started, corresponding message box will pop-up to indicate the result.

Backup video segment

You also can backup the image segments when the image is being playback. The steps are：

1)Enter into the interface of playback the files or playback by time;

2)Press【EDIT】key to start selecting the current playback image, and press【EDIT】again to stop selecting. This segment is slected;

3)You can repeat step 2 to select many segments. 30 segments can be selected in all;

4)After you select all segments, press【ESC】key, a message window will pop-up. If you press “Confirm” button, DVR will start to backup the selected segments. If you press “Cancel” button, DVR will abort backup.

Note：The backup function is effective when two channels are playback synchronously. In such case, each channel can backup 30 segments so 60 segments can be backup for two channels.

Playback the video segment

You can use our file player software to playback the video segment in PC. You can find the player software in attached CD.

Exit playback interface

Please refer to chapter 4.6.

Page 32