4-7 QoS Configuration

This function provides QoS Configuration of Web Smart PoE Switch, the screen in Figure 4-29appears and table 4-4 describes the QoS Configuration objects of Web Smart PoE Switch.

 

Figure 4-29QoS Configuration Web Page screen

 

 

Object

Description

 

 

QoS Mode

Provide different modes for QoS Configuration, the available options are shown as below:

 

Disable QoS Priority,

 

High Empty Then Low,

 

Highest:secHigh:SecLow:Lowest=8:4:2:1

 

Highest:secHigh:SecLow:Lowest=15:7:3:1

 

Highest:secHigh:SecLow:Lowest=15:10:5:1

 

Default mode is Highest:secHigh:SecLow:Lowest=8:4:2:1, the screen in Figure 4-30ap-

 

pears.

Static Port Ingress

Allow to assign Ingress priority on each port of Web Smart PoE Switch, the available options

Priority

are OFF and 0-7. Default mode is 0 and the screen in Figure 4-31appears.

 

 

802.1p Priority [7-0]

Allow assign high and low on each priority, the available options are shown as below:

 

Lowest, SecLow, SecHigh, Highest, the screen in Figure 4-32appears.

Apply button

Press this button for save current QoS configuration of each port on Web Smart PoE Switch.

 

 

Table 4-4Descriptions of the QoS Configuration screen Objects

- 29 -