When the Web Smart PoE Switch receives power, the Power LED should remain solid Green.

2.3.2 As a department / workgroup PoE Switch

Providing up to 12 / 24 PoE, in-line power interface, the Web Smart PoE Switch can easily build a power central-controlled IP phone system, IP Camera system, AP group for the enterprise. For instance, 12 / 24 camera / AP can be easily installed around the corner in the company for surveillance demands or build a wireless roaming environment in the office. Without the power-socket limitation, the switch makes the installation of cameras or WLAN AP more easily and efficiently.

Figure 2-5. PoE Switch connection

2.3.3 Rack Mounting

To install the Web Smart PoE Switch in a 19-inchstandard rack, follow the instructions described below.

Step 1: Place your Web Smart PoE Switch on a hard flat surface, with the front panel positioned towards your front side.

Step 2: Attach a rack-mount bracket to each side of the Web Smart PoE Switch with supplied screws attached to the package. Figure 2-6shows how to attach brackets to one side of the Web Smart PoE Switch.

Figure 2-6Attaching the brackets to the Web Smart PoE Switch

Caution:

You must use the screws supplied with the mounting brackets. Damage caused to the parts by using incorrect screws would invalidate your warranty.

Step 3: Secure the brackets tightly.

Step 4: Follow the same steps to attach the second bracket to the opposite side.

- 9 -