LOWER

Steady

100M

Lit to indicate that a valid physical

ROW

Green

 

UTP/STP connection exists on

 

 

 

that port runs in 100Mbps

 

OFF

10M

Remains off and Link ON to

 

 

 

indicate the port runs in 10Mbps

Table B: FNSW-2400S Port-LED Functions

2.3 The Rear Panel

Figure 2: Rear View of the Switch

2.3.1 Extension Slot

The Switch port 16/24 can be a 100Base-FX switching port as the extension module installed. As the module installed, the port 16/24 on the front panel will be disabled.

Please refer to the Installation Guide of the module for the detailed installation and settings.

NOTE: While powering on, The Switch detects the DIP- switch status of the module, then shown on the front panel LED indicators

2.3.2 Power Connector

The Power Connector is designed to use with the power cord included in the product package. Attach the female end of the cord to the power connector and the male end of the cord to a grounded power outlet. The accepted power range is from 100VAC to 240VAC, 50/60Hz.

2.3.3 Fan

All computing and communications devices work best when not overheated. Please keep the fan area clear so that the cooling function is not impaired.

10

PLANET NOVASwitch series