Per SFP Interface

LED

Color

Function

 

 

Lights to indicate that the Switch is successfully

SFP

 

connecting to the network at 1000Mbps through

LNK/

Green

SFP interface.

ACT

 

Blinks to indicate the Switch is receiving or

 

 

sending data.

 

 

 

2.1.4 Switch Rear Panel

Figure 2-4 & 2-5 shows a rear panel of Gigabit Ethernet Switch.

Figure 2-4GSW-1601/GSW-2401 rear panel

Figure 2-5GSW-2416 rear panel

Power Notice:

1.The device is a power-required device, it means, it will not work till it is powered. If your networks should active all the time, please consider using UPS (Uninterrupted Power Supply) for your device. It will prevent you from network data loss or network downtime.

2.In some area, installing a surge suppression device may also help to protect your Gigabit Ethernet Switch from being damaged by unregu- lated surge or current to the Switch or the power adapter.

2.2 Installing the Switch

This part describes how to install your Gigabit Ethernet Switch and make connections to it. Please read the following topics and perform the procedures in the order being presented.

13