Planet Technology GSW-2416 A.3 Install the Mini-GBICmodule, A-2, Figure

A.3 Install the Mini-GBIC module

Please follow these steps to install the Mini-GBIC modules:

1.Power on the Gigabit Ethernet Switch and place it on a flat surface.

Install the new Mini-GBIC modules by inserting it into the slots and sliding it in until it stops (See Figure A-2). Press it firmly until you feel the module snap into place. Never force, twist or bend the Mini- GBIC modules. The Mini-GBIC module slides in smoothly and the Gigabit Ethernet Switch will automatically detect the new module.

Figure A-2Insert the Mini-GBIC modules

2.After the fiber connection was built successfully. Check the LEDs to verify that if there is a link and a proper connection at the port.

22