This Gigabit Ethernet Switch does not need software

Note

configuration.

 

2.2.1 Desktop Installation

To install the Gigabit Ethernet Switch on desktop, simply follow the next steps:

Step 1: Attach the rubber feet to the recessed areas on the bottom of the Gigabit Ethernet Switch.

Step 2: Place the Gigabit Ethernet Switch on desktop near an AC power source.

Step 3: Keep enough ventilation space between the Gigabit Ethernet Switch and the surrounding objects.

 

When choosing a location, please keep in mind the

 

environmental restrictions discussed in Chapter 1, Section

Note

1.4 Product Specifications.

Step 4: Connect your Gigabit Ethernet Switch to network devices.

A.Connect one end of a standard network cable to the 10/100/1000 RJ-45 ports on the front of the Gigabit Ethernet Switch.

B.Connect the other end of the cable to the network devices such as printer servers, workstations or routers…etc.

Connection to the Gigabit Ethernet Switch requires UTP Category 5 network cabling with RJ-45 tips. For more

information, please see the Cabling Specification in Note Appendix A.

Step 5: Supply power to the Gigabit Ethernet Switch.

A.Connect one end of the power cable to the Gigabit Ethernet Switch.

B.Connect the power plug of the power cable to a standard wall outlet.

When the Gigabit Ethernet Switch receives power, the Power LED should remain solid Green.

14