Chapter 4. Cam Viewer Installation

This chapter will guide you to install the central management software. The ICA- 108/ICA-108W can be managed through its web interface. However, to central control, manage or record the cameras installed in the network Cam Viewer, the windows-based central management software are required.

Note

The Cam Viewer Pro 30 days trial version installation steps are similar. Below is the installation of Cam Viewer Lite.

1.Insert the bundled CD disk into the CD-ROM drive to launch the autorun program. Once completed, a welcome page will appear in IE. Click the “Cam Viewer Lite” hyperlink, the below InstallShield Wizard dialog box will appear.

 

If the welcome screen does not appear, click “Start” at the taskbar.

 

Then, select “Run” and type “D:\Cam Viewer Lite\setup.exe”,

Note

assume “D” is your CD-ROM drive.

 

 

2.Selects the language which you want, Cam Viewer is current including fifteen languages. Please select one of the languages and click ”Next” to continue.

10