Chapter 2. Physical Installation

1.Connect an Ethernet cable

Connect the LAN cable on the ICA-108/ICA-108W to the network device (hub or switch).

2.Attach the antenna (ICA-108W only)

Finds antenna in accessory and attaches the antenna to the ICA-108W SMA connector.

3.Check the LED (Front Panel)

The LED is defined to identify LAN/WLAN connection type. When LAN port is connected, the LED will be green. For WLAN model, if LAN ported is connected, the LED will be green; if LAN cable is removed; the ICA-108W will change to WLAN connection and LED change to orange color.

4.Place the ICA-108/ICA-108W on the table or fix it onto ceiling or wall

Use screws to fix the ICA-108/ICA-108W onto the ceiling or wall. You could also put the ICA-108/ICA-108W in the table directly.

5.Attach the power supply

Plug in power adapter and connect to power source. After power on, ICA-108/ ICA-108W will start to operate.

Note

Only use the power adapter supplied with ICA-108/ICA-108W. Otherwise, the product may be damaged