System setting > User setting

-User authentication: When the option is enabled, you have to enter the username and password in the login window to access the camera. When the option is disabled, you can directly access the camera as a Power user without entering the username and password; however, once you try to access the setup page, you will be asked to enter the administrator’s username and password.

-User add/update: To add or modify a user, complete the required settings in the following fields, including User Name, Password, and Password (confirm). In addition, you have to assign the user level as Power or Guest. The user name and password is available between 4-8 characters.

The following table explains the user level:

Admin Fully control the camera by accessing the complete configuration.

Power Allowed to use some simplified function of the camera, such as using Zoom in/out, Buzzer, Flash led, adjusting the

46