traversal when your device is located on an intranet (LAN) and you wish to make it available from the other (WAN) side of a NAT router. With NAT traversal properly configured, all HTTP traffic to an external HTTP port in the NAT router will be forwarded to the device.
UPnP | To enable or disable the UPnP service here. |
|
|
Friendly Name | Shows the friendly name of this device here. |
|
|
UPnP NAT Traversal | When enabled, the device will attempt to configure port mapping in a |
| NAT router on your network, using UPnP™. Note that UPnP™ must be |
| enabled in the NAT router first. |
|
|
Port Range | The port range will open in NAT router. |
|
|
External IP Address | Show the IP address and port for WAN access through Internet. If NAT |
| traversal is configured successfully, user can use this IP address and |
| port to access this device. |
|
|
3.5.6 IP Filter
You can enter different user’s IP address which are allowing enter or denying by the device.
40