Planet Technology ICA-350 3.11 E-Mail, Test, Enable, Disable, E-mailTo, SMTP Port, E-mailFrom, SMTP Server, E-mailSubject, SMTP Authentication, Authentication Password

3.11 E-Mail

You may setup SMTP mail parameters for further operation of Event Schedule. That’s, if users want to send the alarm message out, it will need to configure parameters here and also add at least one event schedule to enable event triggering.

SMTP ServerTestSMTP PortSMTP AuthenticationDisableEnableAuthentication User NameAuthentication PasswordE-mail ToE-mail FromE-mail Subject

Type the SMTP server name or the IP address of the SMTP server.

Send a test mail to mail server to check this account is available or not.

Set port number of SMTP service.

Select the authentication required when you send an e-mail.

If no authentication is required when an e-mail is sent.

If authentication is required when an e-mail is sent.

Type the user name for the SMTP server if Authentication is Enable.

Type the password for the SMTP server if Authentication is Enable.

Type the receiver’s e-mail address.

Type the sender’s E-mail address. This address is used for reply e-mails.

Type the subject/title of the e-mail.

59