Step 3: To hang the Industrial Gigabit Ethernet Switch on the DIN- Rail track or wall, please refer to the Mounting Installation section.

Step 4: Power on the Industrial Gigabit Ethernet Switch. (Please refer to the Wiring the Power Inputs section for power input) The power LED on the Industrial Gigabit Ethernet Switch will light up. Please refer to the LED Indicators section for meaning of LED lights.

Step 5: Prepare the twisted-pair, straight through Category 5 cable for Ethernet connection.

Step 6: Insert one side of Category 5 cables into the Industrial Gigabit Ethernet Switch Ethernet port (RJ-45 port) and another side of category 5 cables to the network devices’ Ethernet port (RJ-45 port), ex: switch, Pc or Server. The UTP port (RJ-45) LED on the Industrial Gigabit Ethernet Switch will light up when the cable connected with the network device. Please refer to the LED Indicators section for LED light meaning.

Be sure the connected network devices support MDI/ MDI-X. If it does not support then use the crossover

Note category 5 Cable.

Step 7: When all connections are all set and LED lights all show in normal, the installation is complete.

19