Planet Technology IPX-300 Series Step1. Operation Mode (For IPX-300W), Step2. Internet Setting (AP Mode), AP Mode:, WAN Setting, AP-ClientMode:, WISP & AP Mode:

Step1. Operation Mode (For IPX-300W)

For most users, Internet access is the primary application. The IP PBX supports the WAN, LAN and WLAN interface for Internet access and remote access. When you click “Operation Mode” from within the Wizard Setup, the following setup page will be show.

Three WLAN modes of operation are available for Internet Access:

AP Mode:

In this mode the IP PBX supports AP functionality only. The IP PBX has the following network interfaces: WAN, LAN and Wireless LAN.

AP-Client Mode:

In this mode the IP PBX accesses a remote AP. Please be sure that you have an account to access your wireless service provider AP. In this mode the WAN interface is used a 2nd LAN interface.

WISP & AP Mode:

The IP PBX must access remote AP. Please be sure that have account to access from remote AP. In this WISP & AP mode the network interface will change from WAN port to LAN port and all of network access will through by remote AP.

Step2. Internet Setting (AP Mode)

WAN Setting

NAT Mode	Network Address Translation (NAT) serves connecting multiple
NAT Mode	computers to the Internet using one IP address.
	computers to the Internet using one IP address.
	Bridge mode serves to connect a local area network (LAN /
Bridge Mode	Wireless) to another local area network that uses the same
	protocol.
WAN Port IP	Three methods are available for	Internet Access. Static	IP
WAN Port IP	/ DHCP / PPPoE type for your	select. You should refer	to
Assignment	/ DHCP / PPPoE type for your	select. You should refer	to
Assignment	“Network Setting” in user menu.
	“Network Setting” in user menu.