Planet Technology IPX-300 Series Step3. NAT Setting, LAN IP Setting, AP Setting (For IPX-300W)

Figure 7. Wizard-Internet settings

AP Setting (For IPX-300W)

For configuring correctly the WLAN port in client mode, the below instructions will provide a quick start. It is advised if possible to use the simplest network settings for first try.

For making sure the IP PBX is connecting to your wireless router (AP). You need to set up the following: SSID, Frequency Channel, Authentication method and Encryption parameters (Type/Encryption length/Keys.)

Figure 8. Wizard-AP settings

Step3. NAT Setting

LAN IP Setting

LAN IP Address	Private IP address for connecting to a local private
	network. (Default: 192.168.0.1)
Subnet Mask	Subnet mask for the local private network (Default:
	255.255.255.0)