Figure 4-1 The Main Menu of Console Management

4.2.1. Device settings

This menu contains system parameters to display and configure the switch to your network. Menu items are:

●Version (RO): display the firmware version of MGSW-2402

●MAC Address (RO): display the MAC Address of MGSW-2402

●System Up Time (RO): display the work time of MGSW-2402

●System Name: display and change the system name of this Switch

●System Location: display and set the location of this Switch

●System Contact: display and set the administrator of this Switch

●IP Address: display and set the IP address of MGSW-2402

●Subnet Mask: display and set the Subnet Mask of MGSW-2402

●Default Gateway: display and set the gateway of MGSW-2402

●Change User/Password: allow to set the User name and password, default value is root

●Console Login Enabled: provide enable or disable Console login MGSW-2402

●Quit: logout on MGSW-2402

Figure 4-2: Device settings

4.2.2. Port Settings

Select any one port, the menu contains ten items for port management will shown up as below:

•Link (RO): display the link state(UP/DOWN) of per port on MGSW-2402

•Speed/Duplex (RO): display the Speed/Duplex of the device connect to the port

•Port Enabled: allow enable or disable the port of MGSW-2402

- 23 -