4.Powerline USB Adapter Installation

4.1Connecting USB to Powerline Network Adapter

1.Plug the other end of the USB cable into the computer’s USB port.

2.Plug the USB cable into the USB port on PL-103U.

3.Plug the PL-103U directly into a power outlet.

NOTE: Because PL-103E sends data over the powerline of your house, it is best to plug it directly into a power outlet. Do not plug PL-103E into a UPS power strip with surge protection. PL-103E has its own power filter for protection against surges.

4.2 Powerline USB Adapter Driver Installation

The installation procedure for the network driver will vary depending on which operating system you are using on your computer. PL-103U support Windows 98SE, Me, 2000 and XP. The following procedure is for installation under Windows XP. Installation on other operation system is similar.

1.Windows will automatically detect the presence of the USB Adapter hardware in your computer once you have completed the hardware installation. Insert the bundled CD, select “Install the software automatically (Recommended)” and click the Next button.

10