3.5.5.1 LAN Setting

To configure the LAN interface, click on the LAN Setting link in the left navigation bar, show as below.

The Dynamic Host Configuration Protocol (DHCP) Server gives out IP addresses when a device is booting up and request an IP to be logged on to the network. It must be set as a DHCP client to obtain the IP address automatically.

Note: By factory default, the DHCP is disabled, VC-200M’s default LAN IP address is 192.168.1.100, and VC-200S is 192.168.1.200.

The screen contains the following details:

Filed

Description

 

 

IP Address

Enter the LAN interface IP Address of

 

VC-200M/VC-200S

 

 

Subnet Mask

Enter the LAN Subnet Mask of VC-200M/VC-200S

 

 

The Gateway acts as

Enable or disables the DHCP Server of the of

DHCP Server

VC-200M/VC-200S.

 

Select the check-box to enable this option.

 

 

IP Pool Starting

Enter the starting IP Address of the DHCP server.(When

Address

Enable DHCP Server)

 

 

37