Note: By factory default is VDSL2 Profile
4.1.4 Active
To enable or disable VDSl2, click on the Active link in the left navigation bar, show as below.
The screen contains the following details:
Setting Description
Line | Activate or deactivate the line. |
z
z
Click “CANCEL” to exit from this page without saving the changes.
Click “APPLY” at any time during configure to save the information that you have been entered.
4.1.5 Channel Status
To view the channel status is about Date Rate, Delay, Error Counters and Impulse Noise Protection.
51