MAC address of the WAN interface.

net set dhcp server

The ITG supports DHCP server over its LAN interface, allowing hosts in the LAN interface to dynamically obtain IP configuration from the ITG.

The net set dhcp server command allows you to configure the DHCP server.

net set dhcp server no_of_client base_address

Syntax description

no_of_client Number of DHCP clients the ITG would support over the LAN interface.

base_addr Starting address of the DHCP clients

Factory default

Number of DHCP clients is 0

Configuring TFTP Server

The ITG implements a TFTP server over its WAN and LAN interfaces which allows the export of system configuration parameters and dial plan to other ITGs or IP hosts. The TFTP server maintains the following file on its root directory:

File Name

Description

 

 

dialplan.ITG

Dial plan

config.ITG

System configuration parameters

If the TFTP server is enabled, other ITGs can import the above files using the built-in TFTP client software. IP hosts with TFTP client software may download these files too. This section described command for configuring the TFTP server.

net set tftpsrv

This command is used to enable of disable the built-in TFTP server.

net set tftpsrv {on off}

Syntax description

 

on

Enable TFTP server

off

Disable TFTP server

Factory default

 

off

 

IP Configuration Commands

11