4. Telephony Interface Port Configuration Commands

Each telephony interface port equipped by the ITG, regardless of its interface type, is characterized by two sets of configuration parameters. One set is unique to each port, hereafter referred to as port-unique parameters. The other set is common to all the telephony interface ports, hereafter referred to as port-common parameters. The ITG maintains two sets of port-common parameters, primary and secondary. One of the port-unique parameters is used to select which of the port-common parameters the port will use.

This chapter describes commands for configuring the port-unique and port-common configuration parameters.

This chapter is organized as follows:

•Port-Unique configuration commands

•Port-Common configuration commands

Configuring Port-Unique Parameters

The following sections describe commands for configuring port-unique parameters.

set port port# cid name

This command is used to set the Caller ID Name for a telephony port. set port port# cid name {name O}

Syntax description

 

port#

Zero-based number of the telephony port.

name

Caller ID name, 1 to 10 characters. Use hyphen (‘-‘) to represent

 

spaces in the name.

O

Caller ID is name is not available

Factory default

No caller ID name

set port port# cid number

This command is used to set the Caller ID Number for a telephony port. set port port# cid number {number O}

Syntax description

Telephony Interface Port Configuration Commands

19