Planet Technology VIP-157 xxx#, xxx#, xxx#, xxx#, #111#, #136#, #137#, #195#, #198#, #112xxx*xxx*xxx, #113xxx*xxx*xxx, #114xxx*xxx*xxx, #115xxx*xxx*xxx

Network settings via Keypad commands

The ATA series phone adapters support telephone keypad configurations, please connect analog telephone set and refer to the following table for machine network configurations.

IVR Menu Choice	Machine operation	Parameter(s)	Notes:
#111#	Set DHCP client	None	ATA will change to DHCP
			Client
#112xxx*xxx*xxx*		Use the * (star) key	DHCP will be disabled and
	Setup Static IP Address	when entering a decimal	system will change to the
xxx#
		point.	Static IP type.
#113xxx*xxx*xxx*		Use the * (star) key
	Set Network Mask	when entering a decimal	Must set Static IP first.
xxx#
		point.
#114xxx*xxx*xxx*		Use the * (star) key
	Set Gateway IP Address	when entering a decimal	Must set Static IP first.
xxx#
		point.
#115xxx*xxx*xxx*		Use the * (star) key
	Set Primary DNS Server	when entering a decimal	Must set Static IP first.
xxx#
		point.
#136#	Enable auto-config mode	None	For PLANET IPX -2000 IP
			PBX System
#137#	Disable auto-config mode	None	For PLANET IPX -2000 IP
			PBX System
#195#	Reboot	None	The system will reboot
			automatically.
			The system will be reset to
#198#	Factory Reset	None	factory default value and
			reboot automatically.
＊	To switch IP Phone mode	None	VIP-157 only

Following keypad commands can be used to display the network settings enabled on ATA via voice prompt.

IVR Menu Choice	Machine operation	Notes:
#120#	Check IP Address	IVR will announce the current IP address of
		the ATA.
#121#	Check network connection Type	IVR will announce if DHCP in enabled or
		disabled.
#122#	Check the Phone Number	IVR will announce current enabled VoIP
		number.

15