| call will ring the dedicate phone line that assigned with matched number. | |
|
| |
| Assign which server to authorize this incoming VoIP call before call out. | |
Server | For example, if the dial number should be checked by server 1 setting | |
on the “Regster Server” menu (Please refer to the “VoIP Config | ||
| ||
| Register Sever”). | |
|
| |
| When the call is coming , Before or After to pick up the phone , the | |
| Server should check that has the speaker got authorization from | |
| Register Server ? | |
| After:setting on After function , when the call is coming, Server will ring | |
| at first, when user pick up the phone, then Server will go to Register | |
ANS | Server for checking | |
confirmed, then the connection will start to success, otherwise it will sent | ||
| ||
| busy tone. | |
| Before:setting on Before function , when the call is coming, at fist | |
| Server will go to Register Server to check that has the speaker got | |
| authorization? If the authorization has confirmed, then Server start to | |
| ring, otherwise it will send busy tine. | |
|
| |
| Control the Ring Back tone generate timing: | |
| Mode 0: When this VoIP ruter get ring back tone from phone line, it will | |
| send the ring Alert signal to remote VoIP router for generate ring back | |
| tone. | |
| Mode 1: Before this VoIP router dial to phone line, it will send the ring | |
Alert | Alert signal to remote VoIP router for generate ring back tone. | |
Mode 2: After this VoIP router finish dial out number to phone line, it will | ||
| ||
| send Connect OK signal to remote VoIP router. | |
| Mode 3: Before this VoIP router dial to phone line, it will send the ring | |
| Alert signal to remote VoIP router for generate ring back tone, after this | |
| VoIP router finish dial out number to phone line, it will send Connect OK | |
| signal to remote VoIP router. | |
|
| |
| Define the optional special VoIP parameters when received on this | |
Profile | destination. Please input the name you defined on the profile list (Please | |
| refer to the “VoIP Config Call Routoing Call Setup”). | |
|
| |
| Define the profile name for forward the unanswerable VoIP call on this | |
Forward | call in rule. Please input the name you defined on the “Forward” profile | |
| list. | |
|
| |
| Delete this rule item on routing table. | |
| To add new rule item on routing table, please assign the item number | |
Delete | you want to insert before, input AREA CODE then press ADD button to | |
| add it on the list. Then modify the necessary information on the routing | |
| table list. | |
|
|
22