LED Display & Button
| LED Indicators | Descriptions |
| PWR | Power is supplied to the VoIP router |
|
|
| SYS | System LED will be ON when the registration toward the GK/SIP proxy is |
| successful |
|
|
| WAN | Orange: the VoIP router is connected to WAN at 10Mb/s. |
| Green: the VoIP router is connected to WAN at 100Mb/s. |
|
|
| LAN 1 ~ LAN 4 | Orange: the VoIP router is connected to LAN at 10Mb/s. |
| Green: the VoIP router is connected to LAN at 100Mb/s. |
|
|
| Phone 1 ~ Phone 2 | Off: the line is idle. |
| On: the line is being used. |
|
|
| Back Panels |
| Descriptions |
| DC12V |
| Power Adapter connecter |
|
|
|
| Reset |
| Reset to the default setting |
|
|
|
| Phone 1~ Phone 2 |
| Connect to the |
|
|
|
LAN 1 ~ LAN 4 |
| 10/100Mbps Ethernet port, used to connect PC or NB |
|
|
|
WAN |
| 10/100Mbps Ethernet port, used to connect ADSL or cable modem |
|
|
|
Note | Press RESET button on rear panel over 8 seconds or until | |
SYS LED begins to flash, the VoIP Router to this default | ||
| LAN/WAN IP address and Username/Passowrd function. | |
| When factory reset is completed, the Default LAN IP is | |
| http://192.168.0.1 from factory. | |
8