Unique Key (Master Bridge only)
In some special applications, you may need to assign different key for each Master-Slave link instead of the same key for all links. It can be done by setting up a Unique Key for each Slave Bridge. The MAC addresses of the Slave Bridge will be shown in the Bridge MAC field. Please input the key value for corresponding Slave Bridge in the Key field. The key value must be complied with the encryption type as well.
Encryption Key (Slave Bridge only)
For Slave Bridges of a Point-to-Multipoint bridging network, the Encryption Key need to be the same with Unique Key setting assigned to this Slave Bridge. Or, if there is no corresponding Unique Key being assigned on Master Bridge, then Slave Bridge should follow the Share Key assigned on Master Bridge.
UPDATE
Click “Update” and then “Reboot” button when you finish setting up for parameter changes
taking effect.
4.4 Bridge Statistics
This screen shows you the information about the Local and Remote Bridges that are in the same BSS (Basic Service Set).
Clicking MAC address hyperlink of desired device, system will show a Statistics page for you to monitor the bridge link.