If you can't connect:

It is likely that your PC’s IP address is incompatible with the WDAP-2000PE’s IP address. The default IP address of the Wireless Access Point is 192.168.1.1, with a Network Mask of 255.255.255.0.

If your PC’s IP address is not compatible with this, you must change your PC’s IP address to an unused value in the range 192.168.1.2 ~ 192.168.1.254, with a Network Mask of 255.255.255.0.

3.3 Setup Wizard

The setup wizard helps you to configure the basic settings of WDAP-2000PE in four steps.

3.3.1 Time Settings

The time of WDAP-2000PE is automatically synchronized to the local time of the management PC at the first time a connection is made. To modify the device’s time, select desired setting for each field. Click “NEXT” to proceed.

Enable NTP

You can enable the NTP function and configure the server name/IP-

 

address of the NTP server you want to use. Once NTP is enabled, the

 

system will set its own date/time to the value returned fromthe NTP

 

server.

 

 

Local time

Please choose the time zone according to your location and set the data

and time.

zone/date and

 

time

 

 

 

3.3.2 Device IP Settings

You can manually configure the IP settings to WDAP-2000PE, or use DHCP client protocol to obtain IP address automatically. Click “NEXT” to proceed.

10