Management

Web based configuration

 

 

 

 

CLI configuration

 

 

 

 

 

 

 

 

Message Log

 

 

 

 

Firmware upgrade

 

 

 

UPnP support

 

 

 

 

Configuration file Backup/Restore

 

 

Data Rate

Super A/G mode

Up to 108Mbps

 

 

 

802.11g

Up to 54Mbps (6/9/12/18/24/36/48/54)

 

 

 

 

 

 

 

 

802.11b

Up to 11Mbps (1/2/5.5/11)

 

 

Dimensions (L x W x

190 x 145 x 28mm

 

 

H)

 

 

 

 

 

 

Weight

320g

 

 

 

Environmental Specifi-

Operating temperature: 0 – 40 degree C

 

 

 

 

Storage temperature: -20 – 65 degree C

 

 

cation

Relative humanity: 10% – 90% (non-condensing)

 

 

 

 

 

Power Requirement

5V DC, 2A

 

 

 

Electromagnetic

FCC, CE

 

 

 

Compatibility

 

 

 

 

 

 

 

 

 

 

 

1.6 Wireless Performance

The following information will help you utilizing the wireless performance, and operating coverage of WDAP-2000PE.

1.Site selection

To avoid interferences, please locate WDAP-2000PE and wireless clients away from transformers, microwave ovens, heavy-duty motors, refrigerators, fluorescent lights, and other industrial equipments. Keep the number of walls, or ceilings between AP and clients as few as possible; otherwise the signal strength may be seriously reduced. Place WDAP- 2000PE in open space or add additional WDAP-2000PE as needed to improve the cover- age.

2.Environmental factors

The wireless network is easily affected by many environmental factors. Every environment is unique with different obstacles, construction materials, weather, etc. It is hard to deter- mine the exact operating range of WDAP-2000PE in a specific location without testing.

3.Antenna adjustment

The bundled antenna of WDAP-2000PE is adjustable. Firstly install the antenna pointing straight up, then smoothly adjust it if the radio signal strength is poor. But the signal recep- tion is definitely weak in some certain areas, such as location right down the antenna.

Moreover, the original antenna of WDAP-2000PE can be replaced with other external an- tennas to extend the coverage. Please check the specification of the antenna you want to use, and make sure it can be used on WDAP-2000PE.

4.WLAN type

If WDAP-2000PE is installed in an 802.11b and 802.11g mixed WLAN, its performance will reduced significantly. Because every 802.11g OFDM packet needs to be preceded by an RTS-CTS or CTS packet exchange that can be recognized by legacy 802.11b devices. This additional overhead lowers the speed.

6