Planet Technology WGSW-2840 VLAN, “OK”, VLAN, “Close”, Port-base, Port-base, Port List, Port-based, VLAN Member, “Add/Modify”, VLAN Confirutation, “Show VLAN Member”

2.The main page then change to Port-base VLAN table, click on the “Add/Modify” button to create a new VLAN group.

3.The Port-base VLAN Confirutation table then pops up, enter the VLAN group ID, VLAN name and select the member ports for the VLAN.

4.Click the “OK” button to add the VLAN.

5.Select the ports in the Port List field and click on the Add button to add the member ports to the VLAN. The selected VLAN member then shows in the VLAN Member field.

6.Click on the “Close” button and back to the Port-based VLAN main page.

The “Show VLAN Member” button is to list the valid VLANs. You can also remove the added VALN by

click on this button.