Planet Technology WGSW-2840 3. 802.1p-CoSMapping

3. 802.1p-CoS Mapping

QoS settings allow customization of packet priority in order to facilitate delivery of data traffic that might be affected by latency problems. The IEEE 802.1p Priority specification uses 8 priority levels to classify data packets. In 802.1p compliant devices, a tag inserted into the packet header is used to identify the priority level of data packets.

1.Fill the 802.1p Priority (0-7) field in the 802.1p-priority-CoS Mapping Configuration Table.

2.Fill the mapping number in the CoS (0-7)field.

3.Click on the “OK” button to save.

Contents

Page Trademarks Disclaimer FCC Warning CE Mark Warning WEEE Warning Table of Contents 5. TROUBLE SHOOTING 6. APPENDIX 1. INTRODUCTION 1.1 Packet Contents 1.2 How to Use This Manual 1.3 Product Feature 1.4Product Specification Standard Compliance 2. INSTALLATION 2.1 Product Description 2.1.1 Product Overview 2.1.2 Switch Front Panel 2.1.3 LED Indications 2.2 Install the Switch 2.2.1 Desktop Installation 2.2.2 Rack Mounting Step6: 3.CONSOLE MANAGEMENT 3.1Connecting to the Switch 3.2 Login in the Console Interface 3.3 Console Management 3.4 Telnet login 3.5 Commands 3.5.2 Privileged Command 3.5.2.1 Clear command 3.5.2.2 Copy command 3.5.2.3 Disable command 3.5.2.4 Reboot command 3.5.2.5 Set command 3.5.2.6 Show command Page 4. WEB-BASEDMANAGEMENT 4.1 About Web-basedManagement 4.2 Preparing for Web Management 4.3 System Login 4.4 System 4.4.1 IP Configuration 4.4.2SNMP 4.4.2.1 Theory 4.2.2.2 SNMP Configuration “system options” System Name: System Location: Contact: “OK” 4. Management Station Configuration 。Trap Community: must be the same string as “Add community” “Current Management Stations” 4.4.3 Password 4.4.4 CONSOLE 4.4.5 System Upgrade 4.4.6 Saving Parameters 4.4.7 Parameters Backup & Recovery 4.4.8 Load Default 4.4.9 Reboot 4.5 Port Management 4.5.1 Port Configuration 4.5.2 Port Statistics 4.5.3 Port Band Restrict 4.6 Redundancy 4.6.1 Spanning Tree 1. Spanning Tree Protocol Creating a Stable STP Topology STP Port States Each port on a switch using STP exists is in one of the following five states: Blocking Listening 2. STP Parameters Variable Default Spanning-TreeConfiguration Feature User-ChangeableSTA Parameters 3. Illustration of STP Page 4.6.2 Spanning Tree Configuration 1. Spanning Tree Configuration 2. Bridge Information 3. STP Port Configuration 4.6.3 Link Aggregation 4.7 Security 4.7.1 VLAN 4.7.1.1 Theory VLAN Description Port-basedVLAN IEEE 802.1Q VLANs Tagging Untagging 802.1Q VLAN Tags 802.1Q Tag Adding an IEEE802.1Q Tag Port VLAN ID 4.7.1.2 VLAN Configuration Port-base VLAN “Add/Modify” VLAN Confirutation Port List Understand nomenclature of the Switch VLAN Type “port2” Link Type Acces Trunk Access Trunk configuration: 4.7.2 MAC Address Bind 4.7.3 MAC Address Filtering 4.7.4 MAC Address Learning 4.7.5 MAC Address Aging Time 4.8 QoS 4.8.1 Understand QOS QoS Terminology 4.8.2 QOS Configuration 1. MAC-COSMapping 2. VLAN-COSMapping 3. 802.1p-CoSMapping 4. Port-COSMapping 5. COS-QueueMapping 6. Queue Management 4.9 Multicast 4.9.1 IGMP Snooping Theory IGMP Versions 1 and “report” “leave” IGMP Snooping Configuration “Enable” IGMP Snooping Status 4.10 Port Analysis 4.10.1 Port Analysis 4.10.2 Port Mirror 4.11 Storm Control 5. TROUBLE SHOOTING 5.1 Incorrect connections 5.1.1 Faulty or loose cables 5.1.2 Non-standardcables 5.1.3 Improper Network Topologies 5.2.1 Cabling 6. APPENDIX 6.1 Console Port Pin Assignments 6.2 100BASE-TX/10BASE-TPin Assignments