6.On this page, you can set the Radio Band, Mode, SSID and Channel to your WRT-416. The SSID is to identify your wireless network. All the devices (AP and wireless client) on the same wireless network must be configured to the same SSID. You can leave the Radio Band and Channel settings to default. On the Mode Settings, the default is AP mode which allow your wireless client to connect each other and the wired Ethernet network. Please refer to the user’s manual for detial on other available modes.
Click “Next” to proceed.
7.You have finished all basic configurations for WRT-416. Please press “Exit” to close this window. The WRT-416 will perform reboot if major changes are made. After reboot completes, the WRT-416 is ready to use.
