User’s Manual of WSD-800 / WGSD-910/WGSD-1022C

SNMP Operations

SNMP itself is a simple request/response protocol. NMSs can send multiple requests without receiving a response.

。Get --Allows the NMS to retrieve an object instance from the agent.

。Set --Allows the NMS to set values for object instances within an agent.

。Trap --Used by the agent to asynchronously inform the NMS of some event. The SNMPv2 trap message is designed to replace the SNMPv1 trap message.

SNMP community

An SNMP community is the group that devices and management stations running SNMP belong to. It helps define where information is sent. The community name is used to identify the group. A SNMP device or agent may belong to more than one SNMP community. It will not respond to requests from management stations that do not belong to one of its communities. SNMP default communities are:

。Write = private

。Read = public

4.2.2.2 SNMP Configuration

To configure SNMP management, click on System/SNMP menu button, and the web main page changes to the SNMP Management function, as shows in the following:

The followings are the description of the sub-table.

1. SNMP Agent Status Configuration

This block enables to turn on SNMP Agent.

Enabled / Disabled: To turn on or turn off the SNMP function on the Switch.

-29-