Manuals / Brands / Computer Equipment / Switch / Planet Technology / Computer Equipment / Switch

Planet Technology WSD-800 •Share Key, •RADIUS Server IP Address, •Authentication Port(1-65535)

1 106

Download 106 pages, 2.9 Mb

User’s Manual of WSD-800 / WGSD-910/WGSD-1022C

•RADIUS Server IP Address•Authentication Port(1-65535)

•Account Port(1-65535)

•Share Key

The IP address of the RADIUS server being added.

The UDP port used by this server. The valid range is 0 - 65535.

The default UDP Port No. is 1812

The UDP port used by accounting server. The valid range is 0 - 65535.

The default UDP Port No. is 1813

Indicates if the shared secret for this server has been configured.

3.Setup the RADIUS server and assign the client IP address to the Web-Smart switch. In this case, field in the default IP Address of the Web-Smart switch with 192.168.0.100. And also make sure the shared secret key is as same as the one you had set at the switch RADIUS server – 12345678 at this case.

-65-

Contents

Page Trademarks Disclaimer FCC Warning CE Mark Warning WEEE Warning Table of Contents Page 7. APPENDIX-B 1. INTRODUCTION 1.1 Packet Contents 1.2 How to Use This Manual 1.3Product Feature 1.4Product Specification Port configuration Security SNMP MIBs Standards Conformance Regulation Compliance Standards Compliance 2. INSTALLATION 2.1 Product Description 2.1.1 Product Overview 2.1.2 Switch Front Panel 2.1.3 LED Indications Lights 2.1.4 Switch Rear Panel 2.2 Install the Switch 2.2.1 Desktop Installation 2.2.2 Rack Mounting 2.2.3 Installing the SFP transceiver Connect the fiber cable “1000 Force” Remove the transceiver module 3.CONSOLE MANAGEMENT 3.1Connecting to the Switch 3.2 Login in the Console Interface 3.3 Console Management 3.4 Telnet login 3.5 Commands 3.5.2 Privileged Command 3.5.2.2 Copy command 3.5.2.3 Disable command 3.5.2.4 Reboot command 3.5.2.5 Set command Page 3.5.2.6 Show command Page 4. WEB-BASEDMANAGEMENT 4.1 About Web-basedManagement 4.2 Preparing for Web Management 4.3 System Login 4.4 System 4.4.1 IP Configuration 4.4.2 SNMP SNMP Operations Get Set Trap 4.2.2.2 SNMP Configuration System/SNMP 1. SNMP Agent Status Configuration Enabled / Disabled: 2. System Options “system options” System Name: System Location: Contact: 4. Management Station Configuration 。Trap Community: must be the same string as “Add community” “Current Management Stations” 4.4.3 Password 4.4.4 CONSOLE 4.4.5 System Upgrade 4.4.6 Saving Parameters 4.4.7 Parameters Backup & Recovery 4.4.8 Load Default 4.4.9 Reboot 4.5 Port Management 4.5.1 Port Configuration 4.5.2 Port Statistics 4.5.3 Port Band Restrict 4.6 Redundancy 4.6.1 Spanning Tree 1. Spanning Tree Protocol Bridge Protocol Data Units Creating a Stable STP Topology STP Port States Each port on a switch using STP exists is in one of the following five states: Blocking Listening Learning 2. STP Parameters Variable Port Priority Port Cost Default Spanning-TreeConfiguration Feature 3. Illustration of STP 4.6.2 Spanning Tree Configuration 1. Spanning Tree Configuration 2. Bridge Information 3. STP Port Configuration Auto True – False Port Priority: Path Cost: 4.6.3 Link Aggregation 4.7 Security 4.7.1 VLAN Port-basedVLAN IEEE 802.1Q VLANs Tagging Untagging 802.1Q VLAN Tags 802.1Q Tag Adding an IEEE802.1Q Tag Port VLAN ID Default VLANs "default 4.7.1.2 VLAN Configuration Port-basedVLAN Configuration VLAN Configuration Port-based Port-base Understand nomenclature of the Switch tagged untagged “Access” Always Untag “Trunk” “port2” Link Type Acces Trunk Access Trunk configuration: VID VLAN Name Set VLAN’s VID & Name “Add/Modify” 4.7.2 MAC Address Bind 4.7.3 MAC Address Filtering 4.7.4 MAC Address Learning 4.7.5 MAC Address Aging Time 4.7.6 802.1X Port-BasedNetwork Access Control „Device Roles Client Authentication server Switch „Authentication Initiation and Message Exchange dot1x port-control auto „Ports in Authorized and Unauthorized States 4.7.6.2 802.1X Configuration Page Radius Server •RADIUS Server IP Address •Authentication Port(1-65535) •Share Key Page Active Directory Users and Computers 6.The last, run your 802.1X Client 4.7.6.3 802.1X Client Configuration •Configure Sample: EAP-MD5Authentication 1.Go to Start > Control Panel, double-clickon “Network Connections” Properties Page Page 4.8 QoS 4.8.1 Understand QOS QoS Terminology 4.8.2 QOS Configuration 1. MAC-COSMapping 2. VLAN-COSMapping 3. 802.1p-CoSMapping 4. Port-COSMapping 5. COS-QueueMapping 6. Queue Management 4.9 Multicast 4.9.1 IGMP Snooping Theory IGMP Versions 1 and “leave” “Enable” IGMP Snooping Status Immediate-Leave: Forwarding all leave pkt: 4.9.3 IGMP Port Policy Configure Sample: Set IGMP Port Policy Group Number Join/Report 4.9.4 IGMP Group Policy IGMP Group-PolicyApplication Delete: Index Page 4.9.5 Static Routing Port „Static Routing Port and Multicast group VLAN member configue „VLAN configure 4.10 Port Analysis 4.10.1 Port Analysis 4.10.2 Port Mirror 4.11 Storm Control 4.12 IP Stacking Manamement status Management mode IP Stacking group System priority •Master Switch configuration planet_switch •Client Switch configuration Master switch “Saving parameters” Page 5. TROUBLE SHOOTING 5.1 Incorrect connections 5.1.1 Faulty or loose cables 5.1.2 Non-standardcables 5.1.3 Improper Network Topologies 5.2.1 Cabling 6. APPENDIX 6.1 Console Port Pin Assignments 6.2 100BASE-TX/10BASE-TPin Assignments 7. APPENDIX-B Add/Modify add close Egress Policy PVID=2 PVID=3 „802.1Q VLAN - Multi-UntaggedVLAN setting sample „ VLAN Group Membership 192.168.0.222 VLAN Configuration 192.168.0.10 VLAN Configuration Port18 Untag=1,2,3,4 Port3 192.168.0.30 VLAN Configuration „VLAN Group Membership Page Part No. 2081-A92310-002