Manuals / Brands / Computer Equipment / Switch / Planet Technology / Computer Equipment / Switch

Planet Technology WSD-800 1.3Product Feature, 1.4Product Specification, Ports, Copper, WSD-800, Product, WGSD-910, WGSD-1022C, Switch Fabric, SFP/mini-GBICslots, Hardware Specification

1 106

Download 106 pages, 2.9 Mb

User’s Manual of WSD-800 / WGSD-910/WGSD-1022C

1.3Product Feature

▫Complies with IEEE 802.3, 10Base-T, IEEE 802.3u, 100Base-TX, IEEE 802.3ab, 1000Base-T, IEEE 802.3z, 1000Base-SX/LX

▫8-Port 10/100Mbps TP interfaces (WSD-800)

▫8-Port 10/100Mbps TP interfaces with 1 port Gigabit combo (WGSD-910)

▫8-Port 10/100Mbps TP interfaces with 2 port Gigabit combo (WGSD-1022C)

▫High back-plane bandwidth 1.6Gbps / 3.6Gbps / 5.6Gbps (WSD-800 / WGSD-910 / WGSD-1022C)

▫Console/Web/SNMP management

▫Configuration backup and recovery

▫Per port Ingress/Egress bandwidth restriction

▫IEEE 802.1d Spanning tree, 802.1w Rapid Spanning Tree

▫Configurable spanning tree aging time, STP port configuration

▫4 trunk groups, up to 4 ports per trunk

▫Port-based/802.1Q VLAN with 4K VLAN ID

▫MAC Binding/Filtering/Learning, configurable MAC Aging time

▫8 mappings ID to 4 priority queues, Support MAC/VLAN/802.1p/Port to CoS mapping

▫IGMP snooping and IGMP Query mode for Multi-media application

▫Statistic Routing Port

▫1 to many Ingress/Egress Port mirror and Port analysis

▫Broadcast/Multicast/Flooded storm control

▫802.1X Port-Based Authentication

▫IP Stack Technology supports up to 8 units switch stack for centralize management

1.4Product Specification

					WSD-800		WGSD-910		WGSD-1022C
Product					8-Port 10/100Mbps		8-Port 10/100Mbps +		8-Port 10/100Mbps +
Product					Managed Ethernet		1-Port Gigabit TP/SFP		2-Port Gigabit TP/SFP
					Managed Ethernet		1-Port Gigabit TP/SFP		2-Port Gigabit TP/SFP
					Switch		Managed Ethernet Switch		Managed Ethernet Switch


Hardware Specification


Copper			10/100		8 10/ 100Base-TX RJ-45 Auto-MDI/MDI-X ports


							1 10/100/1000Base-T		2 10/100/1000Base-T
Ports			1000		---		1 10/100/1000Base-T		2 10/100/1000Base-T
Ports
							RJ-45 port		RJ-45 port
							RJ-45 port		RJ-45 port


SFP/mini-GBIC slots					--		1 SFP interface, shared with		2 SFP interfaces, shared
SFP/mini-GBIC slots					--		Port-9		with Port-9 / Port-10
							Port-9		with Port-9 / Port-10


Switch Fabric					1.6Gbos / non-blocking		3.6Gbps / non-blocking		5.6Gbps / non-blocking

-7-

Contents

Page Trademarks Disclaimer FCC Warning CE Mark Warning WEEE Warning Table of Contents Page 7. APPENDIX-B 1. INTRODUCTION 1.1 Packet Contents 1.2 How to Use This Manual 1.3Product Feature 1.4Product Specification Port configuration Security SNMP MIBs Standards Conformance Regulation Compliance Standards Compliance 2. INSTALLATION 2.1 Product Description 2.1.1 Product Overview 2.1.2 Switch Front Panel 2.1.3 LED Indications Lights 2.1.4 Switch Rear Panel 2.2 Install the Switch 2.2.1 Desktop Installation 2.2.2 Rack Mounting 2.2.3 Installing the SFP transceiver Connect the fiber cable “1000 Force” Remove the transceiver module 3.CONSOLE MANAGEMENT 3.1Connecting to the Switch 3.2 Login in the Console Interface 3.3 Console Management 3.4 Telnet login 3.5 Commands 3.5.2 Privileged Command 3.5.2.2 Copy command 3.5.2.3 Disable command 3.5.2.4 Reboot command 3.5.2.5 Set command Page 3.5.2.6 Show command Page 4. WEB-BASEDMANAGEMENT 4.1 About Web-basedManagement 4.2 Preparing for Web Management 4.3 System Login 4.4 System 4.4.1 IP Configuration 4.4.2 SNMP SNMP Operations Get Set Trap 4.2.2.2 SNMP Configuration System/SNMP 1. SNMP Agent Status Configuration Enabled / Disabled: 2. System Options “system options” System Name: System Location: Contact: 4. Management Station Configuration 。Trap Community: must be the same string as “Add community” “Current Management Stations” 4.4.3 Password 4.4.4 CONSOLE 4.4.5 System Upgrade 4.4.6 Saving Parameters 4.4.7 Parameters Backup & Recovery 4.4.8 Load Default 4.4.9 Reboot 4.5 Port Management 4.5.1 Port Configuration 4.5.2 Port Statistics 4.5.3 Port Band Restrict 4.6 Redundancy 4.6.1 Spanning Tree 1. Spanning Tree Protocol Bridge Protocol Data Units Creating a Stable STP Topology STP Port States Each port on a switch using STP exists is in one of the following five states: Blocking Listening Learning 2. STP Parameters Variable Port Priority Port Cost Default Spanning-TreeConfiguration Feature 3. Illustration of STP 4.6.2 Spanning Tree Configuration 1. Spanning Tree Configuration 2. Bridge Information 3. STP Port Configuration Auto True – False Port Priority: Path Cost: 4.6.3 Link Aggregation 4.7 Security 4.7.1 VLAN Port-basedVLAN IEEE 802.1Q VLANs Tagging Untagging 802.1Q VLAN Tags 802.1Q Tag Adding an IEEE802.1Q Tag Port VLAN ID Default VLANs "default 4.7.1.2 VLAN Configuration Port-basedVLAN Configuration VLAN Configuration Port-based Port-base Understand nomenclature of the Switch tagged untagged “Access” Always Untag “Trunk” “port2” Link Type Acces Trunk Access Trunk configuration: VID VLAN Name Set VLAN’s VID & Name “Add/Modify” 4.7.2 MAC Address Bind 4.7.3 MAC Address Filtering 4.7.4 MAC Address Learning 4.7.5 MAC Address Aging Time 4.7.6 802.1X Port-BasedNetwork Access Control „Device Roles Client Authentication server Switch „Authentication Initiation and Message Exchange dot1x port-control auto „Ports in Authorized and Unauthorized States 4.7.6.2 802.1X Configuration Page Radius Server •RADIUS Server IP Address •Authentication Port(1-65535) •Share Key Page Active Directory Users and Computers 6.The last, run your 802.1X Client 4.7.6.3 802.1X Client Configuration •Configure Sample: EAP-MD5Authentication 1.Go to Start > Control Panel, double-clickon “Network Connections” Properties Page Page 4.8 QoS 4.8.1 Understand QOS QoS Terminology 4.8.2 QOS Configuration 1. MAC-COSMapping 2. VLAN-COSMapping 3. 802.1p-CoSMapping 4. Port-COSMapping 5. COS-QueueMapping 6. Queue Management 4.9 Multicast 4.9.1 IGMP Snooping Theory IGMP Versions 1 and “leave” “Enable” IGMP Snooping Status Immediate-Leave: Forwarding all leave pkt: 4.9.3 IGMP Port Policy Configure Sample: Set IGMP Port Policy Group Number Join/Report 4.9.4 IGMP Group Policy IGMP Group-PolicyApplication Delete: Index Page 4.9.5 Static Routing Port „Static Routing Port and Multicast group VLAN member configue „VLAN configure 4.10 Port Analysis 4.10.1 Port Analysis 4.10.2 Port Mirror 4.11 Storm Control 4.12 IP Stacking Manamement status Management mode IP Stacking group System priority •Master Switch configuration planet_switch •Client Switch configuration Master switch “Saving parameters” Page 5. TROUBLE SHOOTING 5.1 Incorrect connections 5.1.1 Faulty or loose cables 5.1.2 Non-standardcables 5.1.3 Improper Network Topologies 5.2.1 Cabling 6. APPENDIX 6.1 Console Port Pin Assignments 6.2 100BASE-TX/10BASE-TPin Assignments 7. APPENDIX-B Add/Modify add close Egress Policy PVID=2 PVID=3 „802.1Q VLAN - Multi-UntaggedVLAN setting sample „ VLAN Group Membership 192.168.0.222 VLAN Configuration 192.168.0.10 VLAN Configuration Port18 Untag=1,2,3,4 Port3 192.168.0.30 VLAN Configuration „VLAN Group Membership Page Part No. 2081-A92310-002