MAC address. Their presence is indicated by a value of 0x8100 in the Ether Type field. When a packet's Ether Type field is equal to 0x8100, the packet carries the IEEE 802.1Q/802.1p tag. The tag is contained in the following two octets and consists of 3 bits of user priority, 1 bit of Canonical Format Identifier (CFI - used for encapsulating Token Ring packets so they can be carried across Ethernet backbones), and 12 bits of VLAN ID (VID). The 3 bits of user priority are used by 802.1p. The VID is the VLAN identifier and is used by the 802.1Q standard. Because the VID is 12 bits long, 4094 unique VLAN can be identified. The tag is inserted into the packet header making the entire packet longer by 4 octets. All of the information originally contained in the packet is retained.
802.1Q Tag
|
|
|
|
| User Priority | CFI | VLAN ID (VID) |
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 3 bits | 1 bits | 12 bits |
|
| |||
|
|
|
|
|
|
|
|
|
|
|
| ||
|
| TPID (Tag Protocol Identifier) |
| TCI (Tag Control Information) |
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 2 bytes |
|
|
|
| 2 bytes |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
Preamble | Destination | Source |
| VLAN TAG | Ethernet |
| Data | FCS | |||||
| Address | Address |
|
|
|
| Type |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| ||||
| 6 bytes | 6 bytes |
|
| 4 bytes | 2 bytes |
| 4 bytes | |||||
The Ether Type and VLAN ID are inserted after the MAC source address, but before the original Ether Type/Length or Logical Link Control. Because the packet is now a bit longer than it was originally, the Cyclic Redundancy Check (CRC) must be recalculated.
Adding an IEEE802.1Q Tag
|
|
|
|
|
|
|
|
| Original Ethernet |
| |
Dest. Addr. | Src. Addr. | Length/E. type | Data | Old CRC |
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Dest. Addr. | Src. Addr. | E. type | Tag |
| Length/E. type | Data |
| New CRC |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
New Tagged Packet
Priority | CFI | VLAN ID |
|
|
|
Packets that are tagged (are carrying the 802.1Q VID information) can be transmitted from one 802.1Q compliant network device to another with the VLAN information intact. This allows 802.1Q VLAN to span network devices (and indeed, the entire network – if all network devices are 802.1Q compliant).
Every physical port on a switch has a PVID. 802.1Q ports are also assigned a PVID, for use within the switch. If no VLAN are defined on the switch, all ports are then assigned to a default VLAN with a PVID equal to 1. Untagged packets are assigned the PVID of the port on which they were received. Forwarding