Plantronics 620 manual Initial Pairing, USB Adapter

Pairing

Initial Pairing	Your Bluetooth USB adapter comes pre-paired to your Speakerphone.
	NOTE The Bluetooth USB adapter is only for use with the Calisto 620 and is not for use with other
	Bluetooth devices. The Calisto 620 Bluetooth USB adapter is marked with a graphical identifier.
To Re-pair your Bluetooth	In the event that your speakerphone and Bluetooth USB adapter are not paired or become
USB Adapter	unpaired do the following:
1	Start with the speakerphone powered off.
2
	Remove the Bluetooth USB adapter.

3Place the Speakerphone in pairing mode by pressing and holding the power switch to the RIGHT until the Bluetooth pairing LED flashes BLUE / RED

4Insert the Bluetooth USB adapter directly into your PC USB port. The LED will flash and then turn solid blue to indicate the speakerphone is connected to the Bluetooth USB adapter

5Speakerphone will exit pairing mode.

Reconnect The Bluetooth USB adapter and the speakerphone will automatically reconnect the speakerphone to mobile phone and PC when speakerphone is turned off and then back on and within range of devices.

9