USING YOUR HEADSET
ADDITIONAL FEATURES
Redialing Last Number
To activate last number redial, double press the call control button. You will hear a high tone after each double key press.
Power Saving Mode
Power saving mode temporarily disables the digital signal processing (DSP) feature of the Discovery 655 and 665 headsets to provide a longer talk- time. To enable power saving mode, press both the volume up and down keys at the same time before you make a call. To
NOTE After you turn off the headset, DSP will be
Using Voice Dialing
With the headset on, press and hold the call control button for 2 seconds to activate voice dialing.
NOTE To use voice activated dialing, the voice dialing feature must be enabled on your phone. See your Bluetooth phone manual for instructions.
Rejecting a Call
When receiving an incoming call, press and hold the call control button for 8 seconds to reject the call.
Switching a Call from Phone to Headset
To switch an active call from your phone to your headset, briefly press the call control button for 2 seconds.
Switching a Call from Headset to Phone
To switch an active call from your headset to your phone, press and hold the call control button for 2 seconds.
MOVING OUT OF RANGE
As the headset moves more than 33 feet (10 meters) away from the Bluetooth device or encounters interference:
•Audio quality will degrade
•A beep will be heard in the headset when the connection drops between headset and Bluetooth device
•When out of range, only the power off function will operate
If any of the above occur, move closer to your Bluetooth device.
10