CHARGING
PLANTRONICS DISCOVERY 655
Before using, you must first charge your headset.
1 hour = minimum charge | 3 hours = full charge |
Option A: Using the included AC charger
The indicator light flashes red while charging and turns off when fully charged.
1.Plug the AC charger into the base of the charging pocket and connect it to your power source.
2.Insert the headset into the charging pocket.
Option B: Using a AAA battery
One AAA battery recharges the headset to full capacity up to three times.
1.Twist the bottom of the AAA battery charger
2.Insert the battery into the AAA battery holder.
3.Slide the battery holder back into the battery charger and turn clockwise.
4.Snap battery charger to charging pocket. Ensure that the indentation on the battery charger connector aligns with the shirt clip on the charging pocket.
5.Insert the headset into the charging pocket.
CAUTION
Only replace with a
A
B
DISCONNECTING COMPONENTS
To separate components, grasp both the battery charger and the charging pocket with the shirt clip facing you. Bend the components back and they will snap apart.
NOTE Do not twist the components apart.
4